Chimney and flashing leaks
Leaks around the chimney stack
A chimney can let water in without the roof being involved at all. A cracked crown, a missing cap, spalled brick or eroded mortar joints all admit water into the stack, where it travels down and appears inside looking exactly like a roof leak. Because the symptom is identical, chimneys are a common source of leaks that have been repaired at roof level more than once without success.
Rock County has a winter long enough and cold enough that ice damming, not storm damage, is the dominant cause of roof leaks. The mechanism is heat loss rather than weather: warm air escaping into the attic melts snow on the upper roof, the meltwater runs down and refreezes over the cold overhang, and the resulting ridge of ice backs water up beneath the shingle courses until it finds a way in. The roof itself is usually in perfect condition. Repeated through a Rock County winter, freeze-thaw also works every flashing joint progressively looser, and spring brings hail and straight-line wind on top. The reason this matters is that fixing an ice dam leak by working on the shingles does not work — the problem is insulation and ventilation, and that is a different job.
Both present almost identically. Flashing leaks usually show at ceiling level where the stack passes through; masonry leaks often show lower, on the breast itself, and worsen with wind-driven rain from a particular direction. Checking both before working on either saves repeating the job.
More so, arguably. An open flue on a disused stack takes rain straight into the structure with nothing drawing it back out, so the masonry stays wet and deteriorates faster than one in use.
Leaks around the chimney stack
Buying time when the roof cannot be fixed today
Concrete and clay tile
Bruising and granule loss
Vinyl, fiber cement and wood
Lifting panels for roof work
You will get a straight answer on whether Rock County needs someone out today or whether it can wait — before anyone quotes you for anything.
Call (706) 696-1888